如何通过USB将手机连接到内部SD? -- usb 领域 和 linux 领域 android 相关 的问题

How do I get my phone to connect the internal SD by USB?


7
vote

问题

中文

我最近扎根并升级了我的三星Galaxy S2到版本4,IC。

自这样做,当我通过USB将我的设备连接到我的Ubuntu计算机时,只有12GB内部存储器在我的桌面上显示,并在Banshee中显示。

如何让我的16GB SD卡也可以安装在Ubuntu上,以便它可用于传输音乐文件等?


更新

根据下面的一个答案,也是我现在看到的说明在Web 的其他地方,我应该能够按照以下说明调整USB连接模式:

1.卷起设置。

2.单击更多 - 在无线和网络下)。

3.然后选择USB Utilities〜设置USB电缆连接模式。

4.选择将存储器连接到PC

但是,我在第3步停止了,因为我在 Settings -> More... 下没有"USB实用程序" 选项。我所看到的那样:

设置更多

我不知道这是否是那样的制作或破坏因素,它将获得我的USB连接,但在任何情况下,我不应该有这个选项,因为其他人似乎是什么?我该怎么办才能得到它?


详细信息

以下是我手机上看到的存储设置。正如您所看到的,有2个"内部存储" 条目,其中一个条目约为2GB,其中一个小于12GB。

然后有一个"SD卡" ,似乎有大约15 GB,但它是灰色的,我不确定这是否真的是我的SD卡。

然后在"USB存储" 下,我可以选择安装SD卡,这是有问题的,因为我已经插入了我的卡,并且看似安装了(如在此图像之后所述):

存储设置

如果在存储设置界面中按菜单键,我得到两个选项:

选项

对于"USB计算机连接" ,我有这些设置我不认为我想改变,因为MTP不适用于我的Galaxy选项卡,所以我不相信它将与我的Galaxy S2合作。我尝试了相机选项,但是这样做,所以我的手机在我的电脑上出现了相机图标,限制了目录,并且没有多少帮助:

USB计算机连接

为"存储配置" ,我试图打开和关闭"使用内部存储" ,但它似乎没有差异:

存储配置

这里是来自Powerlamp的屏幕镜头,似乎认为我的音乐位于一个名为"emmc" 的目录中。在PowerLamp中可以访问音乐,但是当我通过USB连接手机时无法访问它:

power放大器emmc

Poweramp告诉我,我实际上可以找到emmc目录,其中我的音乐似乎存储在两个位置, /emmc /mnt/emmc

power ampt两个emmcs

当我通过USB连接我的手机时,它看起来像这样。注释否 emmc 目录,也不是任何 Music 目录,如果您浏览一侧,则有一个 12 GB Filesystem ,我的16GB SD没有条目卡:

12gb文件系统

最后,这是12 GB驱动器的属性:

12gb属性

英文原文

I recently rooted and upgraded my Samsung Galaxy S2 to version 4, ICS.

Since doing so, when I connect my device by USB to my Ubuntu computer, only the 12GB internal storage shows up on my desktop and in Banshee.

How do I get my 16GB SD card to also mount on Ubuntu, so that it is available for transferring music files and so on?


Update

According to one answer below, and also in instructions I've now seen elsewhere on the web, I should be able to adjust my USB connection mode by following the following instructions:

1.Bring up Settings.

2.Click Morexe2x80xa6 (under Wireless and network).

3.Then select USB utilities ~ Set USB cable connection mode.

4.Select Connect storage to PC

However, I am stopped at step 3 because I do not have a "USB Utilities" option under Settings -> More.... What I have looks like this:

settings more

I don't know if this is the make-or-break factor that will get my USB connectivity as hoped, but in any case, shouldn't I have the option since everyone else seems to? What can I do to get it?


Details

Here is the storage settings as seen on my phone. As you can see, there are 2 entries of "Internal Storage", one of about 2GB, and one of a little under 12GB.

Then there is an "SD Card", which seems to have about 15 GB, but it is grey and I am unsure if this is really my SD card or not.

Then under "USB Storage", I have the option to mount an SD card, which is problematic, because I already have my card inserted, and seemingly mounted (as described after this image):

storage settings

If I press the menu key while in the storage settings interface, I get two options:

options

For "USB computer connection", I have these settings which I don't think I want to change, because MTP does not work with my Galaxy Tab, so I'm not confident it will work with my Galaxy S2. I tried the camera option, but that made it so my phone appeared with a camera icon on my computer, limited the directories, and did not do much to help:

USB computer connection

For "Storage configuration", I tried "Use internal Storage" both on and off, but it does not seem to make a difference:

storage configuration

Here is a screen shot from PowerAmp, which seems to think my music is located in a directory called "emmc". The music is accessible from within PowerAmp, but I can not access it when I connect my phone by USB:

power amp emmc

PowerAmp tells me I can actually find the emmc directory, where my music seems to be stored, in two locations, /emmc and /mnt/emmc:

power ampt two emmcs

When I connect my phone by USB, it looks like this. Note no emmc directory, nor any Music directory, and if you look at the side, there is one 12 GB Filesystem, no entry for my 16GB SD card:

12GB filesystem

And lastly here is the 12 GB drive's properties:

12GB properties

     
         
         

回答列表

4
 
vote
  1. ubuntu没有问题,问题最可能在您的手机设置或手机系统中。知道您从哪个来源获取升级是非常有帮助的,这是从您的电话提供商或网上找到的东西的官方更新吗?

  2. 根据您的照片,您有12GB的内部存储和16GB SD卡插入手机。您看到的数字是转换为16.000.000.000字节的结果(作为内存或HDD制造商认为的16GB)进入千兆字节,每个字节包含1024 * 1024 * 1024 = 1073741824字节。如果您将16.000.000.000划分为1024 * 1024 * 1024,您将获得14.9GB或其他东西。

  3. 灰色的"安装SD卡" USB存储可能表示您可能插入手机USB端口的外部USB存储。没有理由点击它,除非您已插入外部USB存储。即便如此,我不确定这是否实际上是在SGS2上支持。

  4. 缺少屏幕抓取,应该是"存储" 页面下方的"菜单" 选项,通常表示为三个点对齐另一个。如果单击此"菜单" ,您将最有可能显示"USB计算机连接" 子菜单或类似的东西。一旦到达那里,您可能会改变手机代表您必须使用计算机的内存。如果您制作该屏幕的屏幕抓取,我可以告诉您选择哪个选项。

  5. 作为侧面笔记,它不是一个非常好的主意,无需卸下它。请在下次从手机中删除SD卡,从问题所示的"存储" 屏幕上为电话关闭或发出"卸载SD卡" 。


如果在存储屏幕上找不到"USB计算机连接" 子菜单,则可以尝试此方法使USB大容量存储在您的设备上工作:

  1. 打开设置,然后单击更多 - (在无线和网络下)。
  2. 选择USB Utilities / Set USB电缆连接模式。
  3. 选择"将存储连接到PC" 。
  4. 将USB电缆从电话连接到PC。
  5. 单击"打开USB存储" 。

此外,您可能需要在尝试之前关闭"USB Debug" 。

 
  1. There's no problem with Ubuntu, problem is most probably in your phone settings or your phone system. It would be very helpful to know from which source did you get your upgrade, was it official update from your phone provider or something found on the net?

  2. According to your picture you have 12GB of internal storage and 16GB SD card inserted in your phone. Numbers you see are the result of conversion of 16.000.000.000 bytes (which is 16GB as memory or HDD manufacturers think) into the gigabytes, each containing 1024*1024*1024 = 1073741824 bytes. If you divide the 16.000.000.000 by 1024*1024*1024 you'll get your 14.9GB or something.

  3. Grayed out "Mount SD card" under USB storage possibly represents the external USB storage you might insert into the USB port of your phone. There's no reason to click on it, unless you have the external USB storage plugged in. And even then, I'm not sure if this is actually supported on SGS2.

  4. Missing from your screen grabs, there supposed to be a "menu" option below the "Storage" page, usually represented as three dots aligned one above the other. If you click on this "menu", you'll most probably be shown "USB computer connection" submenu or something similar. Once you get there, you may change how your phone represents the memory you have to the computer. If you make a screen grab of that screen, I could tell you which option to select.

  5. As a side note, it's not a very good idea to remove/insert SD card without unmounting it first. Please, next time you remove SD card from your phone, power the phone off or issue "Unmount SD card" from the "Storage" screen you've shown in the question.


If you could not find "USB computer connection" submenu on the Storage screen, you may try this approach to make USB mass storage to work on your device:

  1. Open Settings, then click Morexe2x80xa6 (under Wireless and network).
  2. Select USB utilities / Set USB cable connection mode.
  3. Select "Connect storage to PC".
  4. Connect USB cable from phone to PC.
  5. Click "Turn on USB storage".

Also, you might need to turn OFF "USB debug" before trying this.

 
 
       
       
1
 
vote

您还可以尝试从恢复模式安装SD卡。选择Mount USB存储。

 

You can also try mounting the SD card from recovery mode. select mount usb storage.

 
 
1
 
vote

我已经尝试将Galaxy注意与SD连接到我的Ubuntu安装(11.04),它识别两者。

确保启用USB调试。

 

I've tried connecting the Galaxy Note with a SD to my Ubuntu installation (11.04) and it recognizes both.

Make sure you have USB Debugging enabled.

 
 
1
 
vote

我不知道为什么升级到ICS如果之前可以连接,则会对Ext SD卡进行差异,但您可能希望为您的 Ubuntu System的Udev Config 是正确的:

  • doubelecheck您的Galaxy供应商ID使用 sudo lsusb ;你应该看到一个像 Bus 002 Device 010: ID 04e8:0c02 Samsung Corp
  • 的线条
  • 使用您喜欢的编辑器作为root编辑(或创建)"/etc/udev/rules.d/51-android.rules" 并添加此行: SUBSYSTEM=="usb", SYSFS{idVendor}=="04e8", MODE="0666"
  • 确保Perms适用于您刚刚编辑的文件: sudo chmod a+rx /etc/udev/rules.d/51-android.rules
  • 重新启动USB子系统: sudo restart udev
  • 连接您的银河系,看看您的SD卡是否显示现在
 

I don't know why upgrading to ICS would make a difference to mounting your ext SD card if you could connect before, but you might want to doublecheck that your Ubuntu system's udev config is correct:

  • doublecheck that the vendor ID for your Galaxy is 04e8 using sudo lsusb; you should see a line something like Bus 002 Device 010: ID 04e8:0c02 Samsung Corp
  • using your favourite editor as root edit (or create) "/etc/udev/rules.d/51-android.rulesxe2x80x9d and add this line: SUBSYSTEM=="usb", SYSFS{idVendor}=="04e8", MODE="0666"
  • make sure the perms are right for the file you just edited: sudo chmod a+rx /etc/udev/rules.d/51-android.rules
  • restart the USB subsystem: sudo restart udev
  • connect your Galaxy and see if your SD card shows up now
 
 
     
     
1
 
vote
vote
最佳答案
 

解决方案是擦拭并刷新ROM。我猜我曾经搞砸了,就usb而言,我刚刚搞砸了。

 

The solution was to wipe and reflash the ROM. I guess the earlier ROM I had was just messed up as far as USB is concerned.

 
 
1
 
vote

在我的三星Galaxy S II模型GT-I9100上,我必须执行以下操作以在Linux上启用:

  1. 转到设置 - 存储
  2. 单击菜单按钮
  3. 转到"USB计算机连接"
  4. 单击其他的内容而不是"大容量存储"
  5. 单击"大众存储"

这会带来旧的熟悉的"USB大容量存储" 屏幕,友好友好"打开USB存储" 按钮。

在拱我也不得不安装<代码> fuse-exfat

 

On my Samsung Galaxy S II model GT-I9100, I have to do the following to enable mounting on Linux:

  1. Go to Settings xe2x86x92 Storage
  2. Click the menu button
  3. Go to "USB computer connection"
  4. Click anything other than "Mass storage"
  5. Click "Mass storage"

This brings up the old familiar "USB mass storage" screen with a big friendly "Turn on USB storage" button.

On Arch I also had to install the fuse-exfat package.

 
 
-1
 
vote

我知道的最简单的方式,有点晚,但如果你仍然想知道。当您将手机插入计算机时,它会在驱动器h下出现,我相信,然后开启次级驱动器。在我的Windows计算机上也在驱动器J下,有SD卡。

 

Easiest way I know, a little late, but if you are stilll wondering. When you plug in your phone to the computer, it comes up under drive H, I believe, and then a secondary drive opens. Also on my windows computer it's under drive J, and that there is your SD card.

 
 
 
 

相关问题

4  如何将我的Droid X的SD卡作为Windows中的驱动器保持安装?  ( How do i keep my droid xs sd card from mounting as a drive in windows ) 
库存机器x,运行2.1。我将USB连接模式设置为"仅充电" 。 每当我将手机连接到我的电脑充电时,SD卡将安装为计算机中的驱动器。在电话的USB连接设置中,它仍然被列为"仅限" ,但是手机无法使用SD卡。 他们只能让它回来是: 将连接模式更改为手机上的"USB大容量存储" 卸载Windows内的SD卡。 将连接...

4  HTC Mains-to-USB充电器:用于为其他非HTC充电但USB可充电的设备?  ( Htc mains to usb charger use to charge other non htc but usb chargeable devices ) 
我的HTC Desire Z带有充电器,由带USB插座的电源电源插头组成,用于通过USB将手机连接到充电。 可以通过USB收取诸如iPod触摸的其他设备。 假设USB供电的标准,即AMP / WATT /电压额定值,那么这些设备可以安全有效地从相同的适配器中充电。 这将节省资金购买额外的电源适配器,例如,当iPo...

1  USB在三星Galaxy A51上断开连接  ( Usb disconnects on samsung galaxy a51 ) 
我有三星Galaxy A51(SM A515F)运行最新的Android 10和MacOS 10.15开发机。 给出adb授权,但有时(〜每30分钟)它会断开连接并再次显示对话框。 它只发生在此设备(我有约10个不同的设备)。我尝试过不同的USB端口和电缆(包括设备上的电缆),没有运气。 我看到ioreg输出中的设备...

3  如何在Android上设置VLAN?  ( How to setup vlan on android ) 
可以让我想到如何设置 vlan 在android上。我从某个设备获取VLAN 200标记的流量。那么我如何在Android中配置或设置网络内容,以允许标记的流量标记为VLAN 200。 目前,我可以在Mini USB端口上访问正常流量(没有任何VLAN)。 ...

27  什么是USB调试?我能永远保持它吗?  ( What is usb debugging can i keep it on forever ) 
有时我需要将一些音乐从我的电脑转移到我的Galaxy S2,并且必须始终激活USB调试。然后我想,我可以永远保持一般吗?我的意思是,永远保持它可以给我一个问题(成本电池?)?什么是USB调试? ...

2  电话不显示为USB连接  ( Phone not showing as usb connected ) 
moto x4运行Android 8.1.0。尝试将手机连接到任何Windows 10 PC失败。手机开始充电但在设置下,USB表示未连接。手机不会出现在PC上的设备管理器中。一个Moto E4运行Android 7.x没有问题,允许我在每个内部和SD上看到文件。 ...

4  更改Windows资源管理器的Android USB设备名称  ( Change android usb device name for windows explorer ) 
当我将摩托罗拉Moto E(Gen 2)使用USB连接到Windows 7计算机时,手机在Windows Explorer中显示为"motoe2(4g-lte)" ,这是一个techie ,但我立即知道它是什么。 当我连接摩托罗拉moto g(gen 2)时,它显示为"xt1072" ,我找不到非常有用。 我可...

4  如何阻止我的手机思考它连接到计算机?  ( How can i stop my phone from thinking its connected to a computer ) 
我将手机插入我的电视的USB端口,希望能从电视上从手机上播放视频。这并不成功。自从我与电视断开连接后大约4天,它仍然认为它已连接。 我已经关闭了电话,它可能会离开一会儿,但不断回来。左上级状态栏将在圆圈中旋转2个箭头,当我向下拖动看我的通知时,我看到这个: mtp服务状态: 连接到计算机 任何想法? 我的手...

4  我的里程碑并不总是收费  ( My milestone doesnt always charge ) 
我有一个里程碑,有时当我在侧面的"充电灯" 中插头时,我的充电器不会亮起,手机不收费。我认为即使在成功的初始连接之后也可能发生这种情况(即堵塞它并播放光线),因为偶尔我已经在早上拔掉了电话,过夜充电后,它只是30%(而不是预计100%)。 这个问题是间歇性的,有时是权利本身,但其他时候我需要重新启动手机。 我已经取代...

12  从Ubuntu到Android的流声  ( Stream sound from ubuntu to android ) 
当有人打电话给我时,我厌倦了在桌面和Android之间重新打开我的耳机。有没有办法从ubuntu流出声音(我使用 pulseaudio )通过WiFi或USB的Android手机? ...

2  三星平板电脑一直要求在通过USB插入PC时允许数据访问  ( Samsung tablet keeps asking to allow data access when plugging to pc by usb ) 
我不能通过USB访问平板电脑上的数据,因为当我插入时,它会导致对话框允许访问,当我选择允许时,对话框再次弹出,依此类推。 这是三星Galaxy Tab A,我的电脑在Ubuntu上。 更新:在一些测试之后,我确定如果当我通过USB将平板电脑插入PC时,平板电脑屏幕打开,它可以正常工作。但是,如果我用屏幕插上平板电...

1  Android 6.0.1(rooted)阻止WiFi连接的USB系列(载体没有问题)  ( Android 6 0 1 rooted blocking usb tethering of wifi connection carrier has no ) 
我知道有许多关于类似主题的问题,但我相信我的问题是不同的,让我解释: 我在西班牙,运营商确实允许USB连接WiFi连接(手机连接到WiFi网络,我想通过USB连接到我的笔记本电脑,所以笔记本电脑使用WiFi连接电话)。我知道这是可能的,因为在我的三星Galaxy笔记1上使用Android 4.4我可以做到,没问题。 ...

132  如何在USB上设置反向系数?  ( How to set up reverse tethering over usb ) 
我的htc g2手机植根于植物和运行cyanogenmod 7 我没有数据计划。 有时我想在没有Wi-Fi的时候将手机连接到Internet,更新市场应用程序,将SMS消息备份到Gmail,从Gmail同步新联系人等。我不能用USB质量做的事情存储模式。 我有一个连接到互联网的Windows 7专业计算机,但我不...

0  Android Studio 3在Ubuntu 17.04中没有看到连接设备中的Nexus 7运行应用程序  ( Android studio 3 in ubuntu 17 04 not see nexus 7 in connected devices to run the ) 
我在Ubuntu 17.04和Nexus 7中使用了Android Studio 3.1.1。 Android Studio未在窗口中的"连接设备" 列表中未查看设备以运行应用程序: 设备已被激活为具有MTP USB类型的调试USB,并且我已经选择"确定" ,以便每次提示都要求与PC连接USB连接。 它在连接...

29  转移巨大文件的最快方法是两个Android供电设备的推移?  ( What is the fastest way to transfer huge files beween two android powered device ) 
在两个Android供电设备之间传输巨大文件(例如500MB)的最快方法是什么?蓝牙? WiFi Direct?光束?或许USB On-Go? ...




© 2021 it.wenda123.org All Rights Reserved. 问答之家 版权所有


Licensed under cc by-sa 3.0 with attribution required.