如果我要使用ROM Manager Pro刷新新内核,我是否需要重新安装Mod,删除我的数据,或删除我的缓存?
我正在运行cm 6.1,并希望闪现一个chevyno1的内核,但我必须重新加载cm和我的所有数据?
如果我要使用ROM Manager Pro刷新新内核,我是否需要重新安装Mod,删除我的数据,或删除我的缓存?
我正在运行cm 6.1,并希望闪现一个chevyno1的内核,但我必须重新加载cm和我的所有数据?
If I'm going to flash a new Kernel with ROM Manager Pro, do I need to reinstall my MOD, delete my data, or delete my cache?
I am running CM 6.1 and want to flash one of ChevyNo1's kernels but will I have to reload CM and all my data?
否,您不必重新加载或删除任何内容。
但是,确保在安装其中一个内核之前,请确保使用nandroid备份。您可以进入重启循环,只能通过闪烁另一个(下MHz)内核或还原到以前的NANDROID备份来打破。我从库存内核到现在运行超低电压800MHz Chevyno1内核。如果没有重启循环,我无法通过超低电压更快地走得更快。
基本上,您将从最低处理器速度内核以一定的电压开始,然后工作。所以尝试ULV 800MHz,如果它在800MHz运行稳定,请尝试1GHz,然后是1.1GHz等如果您想要节省电池,请尝试ULV内核。如果您想要处理器速度,LV内核应该很好。你的里程将变化,因为没有两个机器人处理器是完全相同的(因为这些内核正在超出处理器的设计规格之外)。
No, you do not have to reload or delete anything.
However do make sure you take a NANDROID backup before you install one of those kernels. You can potentially get into a reboot-loop that can only be broken by flashing another (lower mhz) kernel or restoring to a previous NANDROID backup.
I went from stock kernel to now running the ultra low voltage 800mhz ChevyNo1 kernel. I couldn't get it go any faster with ultra low voltage without a reboot-loop.
Basically you will start with the lowest processor speed kernel at a certain voltage and work your way up. So try ULV 800mhz, if it runs stable at 800mhz, try the 1ghz, then the 1.1ghz, etc. If you're wanting to conserve battery, then try the ULV kernel. If you're wanting processor speed, the LV kernel should be just fine. Your mileage will vary because no two Droid processors are made exactly a like (because these kernels are going outside of the processor's design specifications).
© 2022 it.wenda123.org All Rights Reserved. 问答之家 版权所有