这些是 oldish 标准链拉动在我们的卧室里的吊顶风扇
但我不知道这是可能的吗？如果是这样;所涉及或复杂的是什么？是否需要在天花板和墙壁上潜行新的电线？是否需要雇用电工或者我可以 - 用自己做的事情，但对电东西不太了解 - 可以做到的事情 - 可以吗？
These are oldish standard chain-pull operated ceiling fans in our bedrooms
The light is operated by a wall switch or the one of the chains in the fan, The fan, it is only operated by pulling the chain. I would like to connect them to wall switches... one of those light-fan combo switches similar to this one
But I don't know if that is possible at all? and if so; what is involved or complex would it be? Does it need to have new wires sneak through the ceiling and walls? Would it require to hire an electrician or could I - handy with doing things myself but don't know much about electric stuff-- could do?
You either control it with the electronic control, OR the pull chains. Not both.
If you want to use an electronic control, then you need to bypass and remove the pull chains, preferably electrically. As user118539 witnessed, weird bad things can happen when you try to use both control methods at once.
That's my fan and switch! When I replaced with a new switch (exactly the same), I couldn't get the switch (fan and light) on the wall and chain (light and blade speed) to work 100%... I got it like 75% and then broke a blade off... (from a deleted "answer")
There simply aren't fan controllers out there designed to properly use both. Effectively this would be a case of rewiring the fan so the chains are alternate switches for the controller's input... but nobody builds a thing like that right now.
If there is already a "light switch" in the room that powers the fan, then you can probably get it done without calling an electrician to fish wire. And there ought to be a light switch in the usual place, that is mandatory per the Electrical Code and the Building Codes!
It's possible to have a switch module be the whole kaboodle, but it depends on a very particular wiring scheme (power to the switch, and /3 cable to the fan/light).
For all others, you will need a matched set of control module and wall switch. Fair chance these will be a serial-number-matched set (or have DIP switches to set a code ID) because the manufacturer will want to support independent control of multiple fans.
If power comes to the switch, it is straightforward - you pass power onward to the fan, and the remote communicates wirelessly or with powerline communication (or the red wire as a comm line) to the module. The module sits up in the ceiling above the fan, and takes hot and neutral (and comms), and drives the light and the fan separately
If power comes into the fan, then the wires to the switch are used to extend hot and neutral to the switch (and possibly also comms wire). Other than that, it is much like the above installation.
This is definitely possible, but whether you can diy is another matter. It would require running wires inside walls, through holes in top plates to connect the switches to the fans. You would have work in the attic and probably drill extra holes in top plates.
Depending on the age of these fans and make/model you might be able to get the control you want using wireless remote switches. If you did this, you would not have to run a cable and could work entirely in the living space below the ceiling. Personally I prefer the wall controls like you are envisioning, but a professional electrician would be able to do this far, far easier than an inexperienced diyer.
Could you send pics of one or more of the fans? How old are they?